This is our most popular mains plumbed cooler as it has a 12 litre water holding tank compared to most other coolers of around 4 litres. This allows a greater storage of cold water in high use areas. It also has the highest cooling capacity of up to 6 litres per hour while many other coolers are only rated to 2 litres per hour.
Our D5 series point of use (P.O.U.) Water centres provide a never ending supply of refreshing Cool & Cold water. They attach directly to your water source and are able to accommodate a variety of purification devices. The large 12 litre reservoir makes it the ideal choice for use with Reverse Osmosis purification systems and the fast flow levers and high clearance recessed alcove make it easy to draw water.
SPECIFICATIONS:
CABINET: Top and front panels are moulded of UV treated ABS and side panels are zinc coated steel sheets covered in electrostatically applied high polymer polyester resin.
COLOUR: High gloss cloud white available as standard.
DRIP TRAY: Concealed lift-out design of a high impact durable plastic. Removable for sanitation, it incorporates an anti-splash grid which diverts drain water into the drip tray.
TAPS: High impact polypropylene lever type. Fast flow and easy to operate. They’re assembled directly onto the reservoir and are fully recessed for added protection. Taps are 177mm above the drain grid allowing ample room for filling kettles and other tall objects. Hot tap has safety influence.
TOP: One piece heat resistant plastic. This rust-proof top provides a flat surface to hold small coffee servers and trays.
FUNCTION STATUS DISPLAY: Waterworks unique design. This exclusive device illuminates a red green signal indicating the Power/Hot/Cold position of the dispenser.
COOLING RESERVOIR: Constructed of polypropylene plastic, approximately 12 litres in capacity. The reservoir features large radius corners to facilitate cleaning. The integrated zoned waterway and baffle system prevents ice rings from restricting chilled water flow. Cold water capacity below the baffle is 4.2 litres. Water above the baffle stays at or about room temperature.
AIR FILTER: Located on the float assembly for easy access. The air filter contains a replaceable filter disc with a one micron membrane media.