Using a single casing the cartridge contains Actival for removing Fluoride as well as activated carbon to remove Chemicals and taste. A simple economic method to remove both with a single casing. Water Flow must be limited to 1.5 to 2 litres per minute to allow adequate contact time with the Actival media. (20 micron nominal filtration)

Water connection options are

  • System come standard with the chrome diverter valve that screws on to most kitchen mixer taps. This allows easy operation by moving a lever sideways to “divert” the water from the tap through the purifier. Simply turn the lever downwards to send the unfiltered water into the sink for washing dishes etc.
  • Two universal rubber push on bulbs are available where there is no tap thread, such as the older style separate hot and cold taps from the 1950s to 1970s.  The large UR bulb has an expanding  mouth of 15 to over 20 mm and fits most taps, but being a larger mouth, needs to be held onto the tap when in use.  The smaller rubber bulb fits taps up to 18 mm diameter and has a series of ribs to hold onto the tap, so has a firmer fit.
  • External rubber adapter slips over a non threaded tap and provides a thread for the diverter valve to connect to.

Please check the options when ordering.

Height:       320 mm

Diameter:   150 mm

Capacity (up to) 2000 litres

Replacement cartridge $95.00

Weight 5 kg
Connection Options

ERA External Rubber Adapter, Standard – Diverter valve, UR Rubber large, UR Rubber small