With its 8 litre per hour cooling capacity, the Waterworks™ IC8 is proof that good things come in small packages. Due to the compact design, energy efficiency and quiet operation the IC8 Under-sink chiller is the obvious choice for household applications and offices alike.

SPECIFICATIONS

CABINET: The cabinet is a corrosion resistant, high polymer polyester coated steel panel.

COLD WATER TANK: 1.7 litre fully insulated, 304 stainless steel tank.

REFRIGERATION SYSTEM: R134a refrigerant which is non toxic, non-flammable and non ozone depleting.

INSTALLATION

GENERAL: The Waterworks™ lC8 can be installed in small spaces with adequate ventilation, and can be used in conjunction with most inline filter systems.

The IC8 must be professionally installed and now comes standard with a pressure relief valve to prevent pressure build up as the system ‘ices up’.  Add your own filter system to purify the water or see our other listing which includes a purifier system as an option.

An optional vented tap can be added which provides extra protection to the system should ice build up occur, ( which causes the water pressure to increase potentially causing damage to the tubing, filter and cooling system). This is additional protection to the required Relief valve which is supplied as standard which is connected to a water waste drain pipe.

NOTE : For high use areas two cooler units can be stacked together to double the cooling capacity.

 

COOLING PERFORMANCE: Up to 8 litres per hour at 8-10°C

Cooling Speed: From 27°C to 8°C in 20 minutes

Draw Off Capacity: 8 cups (150ml) below 10°C

WEIGHTS & DIMENSIONS

IC8 WEIGHT WIDTH DEPTH HEIGHT

NETT 12.5kg 21cm 41cm 276cm

 

Weight 5 kg
Chiller unit only or add Vented Tap

Cooler unit only, Add Vented Tap